| Precautions for use of steel wire rope for PU synchronous belt | |
When purchasing the steel wire rope for PU synchronous belt, the surface of 1000xxh rubber synchronous belt shall be clean, the belt shall not be twisted or deformed, and the belt teeth shall be full. 1000xxh rubber synchronous belt shall not be zigzag to avoid damaging the framework material and affecting the belt strength. 1000xxh rubber synchronous belt is strictly prohibited to scratch the belt to avoid early damage of the belt. With high transmission efficiency and compact structure, it is also suitable for multi axis rotation without lubrication and pollution. Therefore, it can work normally in the situation of no pollution and worse working environment. It is widely used in automobiles, hardware, textiles, machine tools, office machinery, electric tools, electric doors and windows, household appliances, instruments and meters, food packaging machinery, mines, petrochemicals and other categories Type. In the case of continuous rope, the only way to end this process is to slacken the steel wire rope of Pu synchronous belt, that is, the steel wire rope is pulled out from the bottom of the conveyor belt for some length. Because the steel wire rope is tightly pressed under the conveyor belt, the conveyor belt is pulled to end the transportation mission by the resistance between the steel wire rope and the conveyor belt. Therefore, this resistance is immeasurable. Under normal circumstances, it is impossible to pull out the steel wire rope from the Pu synchronous belt of the conveyor belt. | |
| 來源： 時(shí)間：2015-11-5 13:32:59 |  |
